BetaFPV TWIG XL 3'' FPV Toothpick Quad (CRSF)
BetaFPV TWIG XL 3'' FPV Toothpick Quad (CRSF)
BetaFPV TWIG XL 3'' FPV Toothpick Quad (CRSF)
BetaFPV TWIG XL 3'' FPV Toothpick Quad (CRSF)

BetaFPV TWIG XL 3'' FPV Toothpick Quad (CRSF)

Regular price
Sold out
Sale price
$280.00
Tax included. Shipping calculated at checkout.

TWIG XL 3'' FPV Toothpick Quad-The first joint quad with Racer X FPV, but not the last one.

This TWIG XL X version frame is definitely the most popular frame at present. The performance and power to weight ratio of this frame design is out of this world! With the Caddx Ratel Camera, 1404 3800KV Brushless Motors, 12A Toothpick F4 2-4S AIO FC, it supports 450mAh 4S battery and provides you a super efficient flight experience. What is more, we adopt the injection molded canopy, protecting your camera well even in a several severe crashing.

      Specification

      Weight: 104.2g (without battery)

      FC&ESC12A Toothpick F4 2-4S AIO FC

      Motors: 1404 3800KV Brushless Motors

      Props: HQ 3016 3-Blade Props

      Camera: Caddx Ratel Camera

      VTX: A01 25-200mW 5.8G VTX

      Frame: TWIG XL Frame

      Canopy: Injection Molded Canopy for TWIG

      Receiver Option: Frsky XM  / DSMX / Futaba S-FHSS / TBS Crossfire

      Battery: 450mAh 4S battery(NOT included)

      Flight time: 3:00-5:00mins


      Flight Controller

      Toothpick F4 2-4S 12A AIO FC- Integrated with a Betaflight MATEKF411RX processor FC, Betaflight OSD and 2-4S 12A ESC, support 4S battery for fast-flying experience

      Camera & VTX

      The Caddx Ratel is a great camera choice for both night flight as well as during the day! Equipped with a high quality 1/1.18" HDR sensor, it provides up to 0.0001 Sensitivity of lux. It is very versatile in that you can switch between PAL and NTSC video and also between 4:3 and 16:9 video formats. Latency is super low at only 8ms.

      Specification of Camera

      • Image Sensor: 1/1.8" Inch starlight HDR sensor       
      • Horizontal Resolution: 1200TVL
      • FOV: 180 Degree
      • Min. Latency: 8ms
      • TV System: NTSC & PAL (changeable)
      • Image: 16:9 & 4:3 (changeable)
      • WDR: Super WDR (HDR)
      • Min. Illumination: Starlight 
      • Synchronization: Internal 
      • Electronic Shutter: PAL: 1/50~100,000; NTSC: 1/60~100,000
      • S/N Ratio:  >60dB (AGC OFF)
      • Video Output: CVBS
      • Camera OSD: Separate OSD
      • DNR: 3-DNR

        Specification of VTX 

        A01 VTX board is lighter and perfectly suitable for canopy with switchable output power between 25mW and 200mW. SmartAudio is available for VTX remote control in default.

        • Output power: 25mW and 200mW (Adjustable)
        • Smart Audio function is included for radio control
        • Frequency: 5.8GHz 6 bands 37 channels

        TWIG Frame

        TWIG XL frames are premium 3mm thick, high-grade T700 carbon cut along the weave and chamfered on both sides interior and exterior edges at .7mm.  All the frames are approximately 140mm motor post to motor post and swing up to 3” props. The frames accommodate motor mounting for 4-hole 9x9 or 12x12 motor mounts. 

        Injection Molded Canopy

        The micro canopy specially designed for 19-20mm camera, which adopts injection molded process and PE material, much durable than the original canopy.

          Package

          • 1 * TWIG XL 3'' FPV Quad
          • 1 * HQ 3016 3-Blade Props (4pcs)
          • 1 * Set of M2*7 screws

          *Battery is NOT included.